4-7
Beeps
The 3SR Receiver produces beeps to alert you of certain operating
conditions.
The arrow keys are used to turn Beeps on or off as desired.
Diagnostics
Note: If the Diagnostics selection does not appear on the screen, keep
pressing the Down arrow soft key until it scrolls onto the list.
Press the
ENTER
key to enter the diagnostic mode. The diagnostic
mode allows the user to perform the following functions:
Default to Factory Settings
When this item is selected and the
ENTER
key is pressed, the unit
will automatically set all parameters to the factory default values.
Warning: All files and references will be lost when resetting the unit
to factory default settings.
Display Test
Allows the user to test the operation of the display. Press the
ENTER
key to begin the display test. Follow the instructions
displayed while performing the test.
Transmitter Diagnostics
Press the
ENTER
key to access the following Transmitter
Diagnostic features:
• Transmitter On/Off - When turned on, provides a CW RF
signal that can be used as a troubleshooting, or installation
aid. The signal is only present when the diagnostic screen
is displayed.
• Transmitter Attenuator - Use the
UP
and
DOWN
arrow
keys to enter the amount of attenuation for the CW
transmitted signal.
Summary of Contents for 3SR
Page 92: ...4 69...
