background image

9

Installation -

Cabling

1.  Using a PoE-Enabled Switch

The Camera is PoE-compliant, allowing transmission of

power and data via a single Ethernet cable.

PoE eliminates the need for the different cables used to

power, record, or control the camera. Follow the illustration

below to connect the camera to a PoE-enabled switch using

an Ethernet cable.

2.  Using a Non-PoE Switch

If a PoE-enabled switch is not used, use a power adaptor

for power transmission and non-PoE switch for data

transmission.

Follow the illustrations below to connect the camera

without a PoE-enabled Switch.

Two Options

Use a PoE-enabled swtich to connect data and power through a single cable and begin viewing and recording images instantly.

A non-PoE switch will require an adaptor for power transmission.

Ethernet Cable

Ethernet Cable

Power

 

How to connect to the network through the water proof cable 

 

  Insert the Lan cable into the rubber first as (a) below.

    Put the Lan cable into (b), then (c) will be assembled to  

    (b) tightly. As a final step, (d) need to be assembled to (c)

    without making any space. 

b

c

d

a

Summary of Contents for Vision 4K













Reviews: