55 / 69
ON/OFF
BARCODE READING LENGTH
Scan the following barcodes to change the read length. For additional information, see the Read
Length instructions. The minimum and maximum length is 2-80. Minimum default value =4, and
maximum default value =48. (Note: After scanning "Minimum Barcode Length" and "Maximum
Barcode Length", you need to scan the specified barcode length and save the barcode. Please refer
to the description of barcode length.)
CHECK BIT
Scan the bar code below to determine whether the check bit should be transmitted at the end of
the scanned data. The default is off.
HAN XIN CODE
On
*Off
Minimum Barcode Length
Maximum Barcode Length
On
* Off
All Default Han Xin Settings
