WaveRider LMS4000, User Manual

Page: 117 / 282

8 Configuring the EUM
APCD-LM043-4.0 99
2. Type save or commit and press Enter.
3. Before the new power level will take effect, you must reboot the EUM by typing reset
and pressing Enter.
Example:
The following example
• Sets the EUM operating frequency to 917 MHz,
• Sets the transmit power level to
high
,
• Saves the new settings,
• Reboots the EUM so that they new parameters take effect, and
• Displays the EUM RF parameters.
Console>
Console> radio frequency 9170
Console> radio rf high
Console>
Console> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Console>
Console> reset
rebooting EUM ...
(... Power On Self Test ...)
WaveRider Communications, Inc. LMS3000
Password:
Console>
Console> radio
RF Power: HIGH
Radio Frequency: 9170
Console>
8.3 Configuring EUM IP Parameters
In IP Network Planning on page 53, you determined the following:
• CCU radio IP address and subnet mask
• EUM Ethernet IP address and subnet mask
• End-user PC Ethernet IP address and subnet mask
To set the EUM Ethernet IP address
1. Type ip ethernet <aaa.bbb.ccc.ddd> <net mask> and press Enter.
• <aaa.bbb.ccc.ddd> is the CCU Ethernet IP address.
• <net mask> is the net mask.