WaveRider LMS4000, User Manual

Page: 104 / 282

7 Configuring the CCU
86 APCD-LM043-4.0
• Saves the new settings,
• Reboots the CCU so that the new parameters take effect, and
• Displays the CCU RF parameters.
Console>
Console> radio frequency 9170
Console> radio rf high
Console>
Console> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Route Config saved
Authorization Database saved
DHCP Server Config saved
Console>
Console> reset
rebooting CCU ...
(... Power On Self Test ...)
WaveRider Communications, Inc. LMS3000
Password:
Console>
Console> radio
RF Power: HIGH
Radio Frequency: 9170
Console>
7.4 Configuring CCU IP Parameters
In IP Network Planning on page 53, you determined the following:
• CCU gateway IP address and subnet mask
• CCU radio IP address and subnet mask
• CCU Ethernet IP address and subnet mask
To set the CCU Ethernet IP address
1. Type ip ethernet <aaa.bbb.ccc.ddd> <net mask> and press Enter.
• <aaa.bbb.ccc.ddd> is the CCU Ethernet IP address.
• <net mask> is the net mask.
CAUTION: The CCU only accepts subnet masks using the
shorthand notation; for example, it accepts ‘
16
’, but not
‘
ffff0000
’ or ‘
255.255.0.0
’.
2. Type save or commit and press Enter.
3. Before the new CCU Ethernet IP address will take effect, you must reboot the CCU by
typing reset and pressing Enter.