First steps
page 28 of 30
Transferring a card
When you have completed all settings to your satisfaction, you can trans-
fer the card to your WaveU.
Check if your configuration fits on your WaveU. Remember: you have
512kB of memory available. You can see how much space your compila-
tion takes up under Card Info.
Here you can see the size of the map in bytes. Please note that even with
an empty card 12288 bytes of the card are always occupied by the card
format.
Click on Send Card in the lower right corner to start the transfer.
The left corner of the WaveU flashes blue to indicate that the transfer is in
progress. You can see the progress of the transfer on the progress bar of
the software. After a few seconds, the transfer should be complete and the
blue LED will turn off.
The status display informs you if the transfer was successful.
If the transfer was not successful, the status
Transfer Failed
is displayed.
In this case, check whether your WaveU is connected to the computer and
is displayed as described above under Device.
Summary of Contents for WaveU
Page 1: ......
