First steps
page 21 of 30
Editing a card
Deleting a tone
To delete a tone from your compilation, first select
the tone to be deleted and press the minus key (-)
below the tone list.
If there are no more tones in the list, the minus but-
ton will be grayed out.
Adding a tone
First make sure that there are less than 128 tones
in the list. Exactly 128 tones fit into the list. If it is
full, you cannot add any more tones. You can see
this by the grayed out plus button.
To add another tone to the list and thus to your
compilation, press the plus button (+) below the list.
A new, initially empty Tone is created.
Each tone consists of at least one voice, at most
two voices, which correspond to a multisample.
Samples can be assigned to these voices later.
Rename a tone
First select the tone you want to rename in the Tones list.
Now enter the new name for the tone in the Tone Name text field. The in-
put is automatically accepted, you don't have to press Enter or the like.
Note that the U supports only eight characters for tone names.
Rearranging the tones list
The tones are available in the U in the order in which they are in the tones
list. If you want to change the order, first select the tone in the list that you
want to reorder. Now press the arrow keys to the right of the list to move
the tone within the list.
Summary of Contents for WaveU
Page 1: ......
