Interpreting Screen Displays
MS-4900, Rev. A
4–7
Table 4-7. Logical Receiver Status Fields
Field
Should be:
Meaning:
Logical
receiver
R0 through R3
Status only
NOTE: Logical receivers are assigned in
stat mux operation only
Serial port
R0 = Serial 1
R1 = Serial 2
R2 = Serial 3
R3 = Serial 4
Port being displayed
% of buffered
data
0 to 100
Can reach 100% only when one logical
receiver is delivering data
Current activity
Active/Inactive
Status only
Active = the output data is in the receiver
buffer
Inactive = no output data remains in the
receiver buffer
Flow control
RTS ON/RTS OFF
XON/XOFF
RR-RNR
Hardware flow control.
Software flow control.
Software flow control.
Continuous display of RTS OFF, XOF, or
RNR may indicate a possible PC software
problem or a cabling problem between the
PC and the IDR V1000.
View Setup of
Logical Receivers
The first set of screens under the
View Setup
main topic refer to the settings for the
stat mux logical receivers R0 through R3. Each logical receiver has an individual
serial number based on the serial number for the IDR V1000. For example, if the
IDR V1000 serial number is 9000000, the serial number assigned to logical receiver
R0 is 9000000. (The serial number for R1 would be 9000001, and so on.) These are
the numbers being displayed in the first screen
NOTE: If serial port 4 hardware is set at the factory as a synchronous output port,
then logical receiver R3 is not available for stat mux operation.
A serial port is automatically assigned to each logical receiver. You can view the
current output settings for that port:
Figure 4-6. View Setup of Serial Ports
Serial 1/PAD/DF,PD
19200/8/None/1/No Flow
View Setup
of Receiver 0 xxxxxx0
Summary of Contents for IDR V1000
