Appendix A - NCL INTERFACE _______________________________ Boomer-III User Manual & Integrator’s Guide
Copyright Wavenet Technology © October 2003
88
BM310012WT04
WN_GET_SETTINGS
:
Get configuration information (NCL
string “ZF?u”).
SUCCESS is followed by a block of status information in the format
shown below:
WN_GET_SETTINGS Response Format:
7 6 5 4 3 2 1 0
LLI [4 bytes]
Serial Number [16 bytes]
.......
Reserved (ignore)
Home System Prefix
Home System ID
Home Area ID
5 Reserved bytes (ignore)
NCL Confirmation Mode
NCL Rx Control
NCL Tx Control
NCL Event Flags
Number of Group LLIs (n)
Group LLIs [4*n bytes]
Number of static channels (m)
Static channels [2*m bytes]
Reserved (ignore) [17 bytes]
.............
Where:
LLI:
Four byte unsigned integer (the standard
NCL command 4E also gives the LLI
number back).
Serial Number:
ASCII string containing the serial number
of the modem. Unused bytes are zeros.
The NCL command ZFts also gives the
serial number back.
NCL Confirmation Mode:
Default start-up state for the
confirmation mode of the NCL layer. It
is a zero for unconfirmed mode, or a one
for confirmed mode.
NCL Rx Control and NCL Tx Control:
Indicate the start-up state for the NCL
settings for RX_STATUS and
TX_STATUS respectively. A zero
