Modem Test Jig ___________________________________________ Boomer-III User Manual & Integrator’s Guide
Copyright Wavenet Technology © October 2003
56
BM310012WT04
Using the Modem Test Jig
The Boomer-III Test Jig provides RS-232 serial interface ports
between a PC and the modem. It is designed to enable you to quickly
interface the Boomer-III to a standard PC (through a COM port) or a
terminal device with an RS-232 serial port.
The test jig acts as a temporary host/terminal for the modem and
provides access points to the radio’s communication port, allowing you
to monitor activity with a logic probe, multimeter or oscilloscope.
Features
All Input/Output Lines configurable by jumpers and/or
accessible through parallel FPC connector.
On-board dual RS232 Serial Communication interface ports
with DB9 connectors
Through the SPY MODEM connector, you can monitor the data
transmitted from the modem (RX, DSR, and CTS).
Through the PORT 2/SPY PC connector, you can monitor the
data transmitted from the PC (TX, RTS and DTR), or talk to the
second serial port of the modem. You can make this choice by
putting all five jumper links on the right or left side of the RDW
header connector near the port.
Switches and LED indicators on SS0 - SS3 modem I/O lines.
On-board voltage regulator for Boomer-III OEM supply rail.
On-board LEDs for three external signals:
Low battery
Message waiting
In range
On-board antenna matching network allowing conversion from
MMCX to SMA connectors.
Test Jig Updates
From time to time updates may be provided for the Boomer-III test jig
and these should be implemented as per the Update Notice. If you are
unsure if your test jig incorporates all the latest updates please contact
Wavenet Technology.
