USER GUIDE
Low-Noise QCL Driver — Laboratory Series
1
Firmware versions 1.5 and later operate with the
LabVIEW Virtual Instrument application and the Remote Command Set
ORDERING INFORMATION
PART NO
DESCRIPTION
QCL500 LAB
500 mA Low Noise QCL Instrument
QCL1000 LAB
1.0 A Low Noise QCL Instrument
QCL1500 LAB
1.5 A Low Noise QCL Instrument
QCL2000 LAB
2.0 A Low Noise QCL Instrument
NOISESCAN
Noise Characterization Scan
55-110014
SMA-BNC Cable
55-110015
USB Cable
WCB310
Shielded SMA-SMA Cable
QCLTL-LO
Resistive Test Load for QCL500 or
QCL1000
QCLTL-1500
Resistive Test Load for QCL1500
QCLTL-2000
Resistive Test Load for QCL2000
RCKMT-LABSNGL
19” Single Unit Rack Mount Kit
RCKMT-LABDUAL
19” Double Unit Rack Mount Kit
INTLK REPL KIT
(included with purchase)
Interlock Replacement Kit with BNC
terminator and modified D-SUB
connector to override interlocks
e
Pb
RoHS
Compliant
Applies to Product Revision A,
firmware 1.5 and later
© Apr 2023
1
Covered by U.S. Patents 6,696,887; 6,867,644 and 7,176,755. Licensed from Battelle Memorial Institute
The datasheet for the QCL LAB Series Firmware Version 0.79 (compatible with the QuickConnect Application) is located at:
www.teamwavelength.com/download/datasheets/qcl-lab079.pdf
QCL
TABLE OF CONTENTS
(STAND-ALONE) 9
REMOTE OPERATING INSTRUCTIONS 16
TROUBLESHOOTING 17
ADDITIONAL TECHNICAL NOTES
PAGE
