4
Install Process Overview
01
This is the process that we suggest using for installing your MIMO Cel-Fi GO X:
1
Read this manual.
Ideally from start to finish so that you understand the whole
process before you begin.
2
Download the Wave app
to your phone by visiting
waveform.com/waveapp
3
Select your carrier
. Your GO X's are preprogrammed to Verizon. If you’re boosting
a different carrier’s signal you’ll need to use the Wave app to
change the carrier on
both amplifiers
.
4
Find the best outdoor antenna location and direction
. This step is the most time-
consuming, but it’s worth the effort. Getting it right has a
huge
impact on your
system’s performance.
5
”Temporary install” and indoor antenna positioning
– Without making any holes in
your roof or walls, temporarily run your twin cable indoors to your GO X's, and find
an indoor antenna location with enough separation from the outdoor antenna.
6
Verify performance and hard-wire everything
– Run speed tests and check your
bars – if everything's looking good, it’s time to finalize all your cable runs and mount
antennas.
7
Tell us how your system is doing
– We really love hearing how our customer’s systems
are performing. Send us an email and let us know how things look.
If anything’s unclear, or you’re unsure about something, just call us at (800) 761-3041 or
email [email protected].
W
e're generally available from 9am-5pm PT, Monday to Friday.
