background image

It’s important that there’s at least some 4G LTE or 5G signal outside or on the roof of the 
building where you’re installing your 4x4 MIMO antennas, and ideally it should be “usable.” If 
you don’t have usable signal outside, proceed with caution, and consider giving us a call.

What Do We Mean by “Usable”?

When you take your cellular router or hotspot outdoors, you should have a reliable data 
connection even without connecting your new 4x4 MIMO external antenna(s). When running a 
speed test, you should have at least 0.1 Mbps download and upload speed.

MIMO antennas will help condition the outdoor signal and get you better data rates. But if the 
signal outside your building isn’t usable to begin with, MIMO antennas might not help.

You can certainly still give the MIMO antenna a shot, but you may still be unable to connect.

Compatibility

First, a quick reminder: Our 4x4 MIMO Panel and Log Periodic Antennas support almost every 
3G, 4G LTE, and low/mid-band 5G service in use in the US and across the world. Here are the 
bands that each antenna covers:

*Your router’s supported bands may vary from this list.

B2/n2, B4, B5/n5, B12, B17, B29, B30, B46, B66/n66, n77

B2/n2, B4, B5/n5, B13, B46, B48/n48, B66/n66, n77

B2, B4, B5, B12, B25, B26, B41/n41, B46, B66, B71/n71    

CBRS, B48/n48        

All supported LTE Bands

: Band 1-10, Band 12-20, Band 23-30, Band 33-41, Band 46-48, Band 

65-77, B85

All supported 5G Bands

: n1, n2, n3, n5, n7, n8, n12, n14, n18, n20, n25, n26, n28, n29, n30 

n34, n38, n39, n40, n41, n65, n66, n70, n71, n80, n81, n82, n83, n84, n86, n89, n90, n95          

Before You Start

00

4

Summary of Contents for 4x4 MIMO

















Reviews: