Your LTE/5G router
Connect the cables or pigtails to
the cellular antenna ports.
If you are unsure which ports to
connect to, refer to page 8 for
further guidance.
Optional
- TS9 or U.Fl Pigtail
Adapter x4
Only included in our complete
4x4 MIMO kit.
If your router uses TS9 or U.FL
connectors for it’s cellular antenna ports,
install the relevant pigtail here.
If your router uses SMA connectors
instead, connect the Quad-RS240 cable
directly to the router.
Optional
- 4x Lightning
Surge Protector Kits
Only included in our complete
4x4 MIMO with Lightning Surge
Protectors Kit.
Install outdoors, just before Quad-
RS240 cable enters the building.
Connect each Lightning Surge
Protector to the building’s
ground with 10 AWG or thicker
grounding cable.
Additional instructions on
grounding are found in the next
section of the manual.
4x4 MIMO Panel Antenna
or
cross-polarized Log Periodic Antennas
Depending on which kit you purchased. Shown with the included J-Mount(s).
Quad RS240 N-Male
to SMA-Male Cable
Only included in our complete
4x4 MIMO kit.
11
