Assembly Instructions
STEP 1 - Attach Stabilizers
Please remove packing material from frame or stabilizers.
Attach Front Stabilizer -
Position the front stabilizer as shown. Attach the front stabilizer
(54) to the frame using the wrench (86) with two
M8 bolts (80),
two M8
flat washers (82), and two M8 nuts (81). One at a time
place a bolt through the stabilizer from the bottom side. Place a flat
washer onto bolt. Then screw a nut onto the same bolt and tighten.
Repeat for the other Stabilizer hole. Finally, check to see the bolts
are both tightened securely.
Attach Rear Stabilizer -
Position the rear stabilizer as shown. Attach the front stabilizer (79)
to the frame using the wrench (86) with two
M8 bolts (80), two M8
flat washers (82), and two M8 nuts (81). One at a time place a bolt
through the stabilizer from the bottom side. Place a flat washer
onto bolt. Then screw a nut onto the same bolt and tighten. Repeat
for the other Stabilizer hole. Finally, check to see the bolts are both
tightened securely.
8
