Assembly Instructions
STEP 3 - Attach Handlebars
Secure Handlebar Post -
Slide the Handlebar Post (12) down into the mainframe of the equipment as
shown. Tighten the mainframe knob to secure the handlebar post.
Secure Handlebars -
Remove M6 screw (7) when installing handlebars. Slide the Handlebars (5)
onto the Handlebar Post (12). Install Adjustment Knob (6) by screwing it
loosely into the handlebars (5) from the bottom. Pull adjustment knob (6)
down to move into desired position. Using a hex wrench (85) tighten the
M6 screw (7) and hand tighten adjustment knob (6) to secure.
Handlebar Fore/Aft Adjustment -
To adjust Handlebar fore / aft position, loosen the adjustment knob (6) and
loosen M6 screw (7). Slide the Handlebars (5) to desired position. Using a
hex wrench (85) tighten the M6 screw (7) and hand tighten adjustment
knob (6) to secure.
Handlebar Height Adjustment -
To adjust Handlebar height, loosen the knob on the mainframe handlebar
post. Move the Handlebar Post (12) to desired position. Hand tighten
adjustment knob to secure.
10
