Assembly Instructions
STEP 5 - Attach Console
Identify the Console (1), and Handlebars (5). Slide the Console
onto the Handlebar bracket until it clips into place. Connect the
Console cable (88) to the Bike cable.
The Console uses two AAA batteries (not included); alkaline
batteries are recommended. Remove the battery cover, and insert
the batteries into the battery compartment. Make sure to position
the batteries as shown by the diagram inside the battery
compartment. Then, reattach the battery cover.
STEP 6 - Attach Bottle Rack
Identify the Bottle Rack (31), and 2x M5 Bolts (32). Using the hex
wrench (83) attach the Bottle Rack to the front right side of the
Mainframe with the two bolts. Then tighten until secure.
12
