Wavecom W-CLOUD Manual Download Page 328

Page: 328 / 381

318



Additional Functions

WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V9.1.0

CmStick CmStick/C

CmCard/SD CmCard/M CmCard/E

After the installation of the software on the computer, the

icon will be presented in the tray icon area.

Note:

When a CmStick is plugged into an USB socket of a LCD monitor, the CmStick will not be detected

by the software protection server if the monitor is switched off.

Warining:

Never try to debug the W-PCI, W-PCIe or W-CODE software. This will disable all the licenses

on the CMStick.

You can find more information regarding the CodeMeter and CmStick in the related help file.

CodeMeter and CmStick User Guide (Help)

Important:

For current and detailed information consult the CodeMeter help files.

For help, click the

CodeMeter Icon

Summary of Contents for W-CLOUD






























































































































































































































































































































































































Search results

Summary of Contents for W-CLOUD

Reviews:

Related manuals for W-CLOUD

Brands by name

Popular brands

Wavecom W-CLOUD, Manual

Search results

Summary of Contents for W-CLOUD

Reviews:

Related manuals for W-CLOUD

Brands by name

Popular brands