manualshive.com logo in svg

Wavecom TnP 3PLM 20A, User Manual, Page: 39 / 48

Share
Download
Wavecom TnP 3PLM 20A User Manual Download Page 39

39

TnP 3PLM

User Manual

Wavecom

LED and Button Functions

This printer has one button and one three-colour LED indicator. By indicating the LED with different colour and 

pressing the button, printer can feed labels, pause the printing job, select and calibrate the media sensor, print 

printer self-test report, reset printer to defaults (initialization). Please refer to the button operation below for 

different functions.

LED Colour

Description

Solid Green

This indicates that the power is on and the device is ready to use.

Flashing Green

This indicates that the system is downloading data from PC to memory or the printer is paused.

Amber

This indicates that the system is clearing data from printer.

Solid Red

This illuminates printer head open, cutter error.

Flashing Red

This indicates a printing error, such as head open, paper empty, paper jam or memory error etc.

Regular Button Function

Feed labels

When the printer is ready, press the button to feed one label to the beginning of next label.

Pause the printing job

When the printer is printing, press the button to pause a printing job. When the printer is paused, the LED will 

be green flashing. Press the button again to continue the printing job.

Power on Utilities

There are six power-on utilities to set up and test printer hardware. 

1.  Turn off the power switch.

2.  Hold the Feed button then turn on the power switch.

3.  The printer LED will cycle through the following options. Release the button when the LED reaches the 

relevant utility.

LED Colour & Action

Functions

Amber

Red 

(5 Flashes)

Amber 

(5 Flashes)

Green 

(5 Flashes)

Green/

Amber 

(5 Flashes)

Red/

Amber 

(5 Flashes)

Solid 

Green

Gap/Black Mark Sensor 

Calibration

Release

Gap/Black Mark Sensor 

Calibration, Self Test and Enter 

Dump Mode

Release

Printer Initialisation

Release

Set Black Mark Sensor as Media 

Sensor and Calibrate the Black 

Mark Sensor

Release

Set Gap Sensor as Media Sensor 

and Calibrate the Gap Sensor

Release

Skip AUTO.BAS

Release

Summary of Contents for TnP 3PLM 20A

















































Reviews:

No comments