NOTE: Some users may resist wearing a Tracker or find it uncomfortable. This typically
subsides after a few minutes of swimming. For wearers who complain of a tight fit,
gently bend the Tracker’s ends outwards. It will return to its normal state after use.
BUDDYTAGS™
BuddyTags are used by the w10 to detect when the wearer enters the
water. They attach to clothing quickly, safely and securely using powerful
magnets. ToddleTags may also be attached to your pet’s collar using the
included carabiner.
For children it is recommended that the BuddyTag be attached along the
back of their waistline to help prevent them from playing with or trying to remove their
tag.
TO ATTACH BUDDYTAG TO A PERSON:
1.
Remove the magnetic Back Plate by
sliding
it off the
BuddyTag housing.
2.
Position the Back Plate on the inside of the wearer’s clothing (shirt, shorts,
bathing suit, etc.) in the middle of their backside.The smooth curved
surface should be facing in towards the wearer’s body.
3.
Place the BuddyTag housing over the wearer’s clothing in the
location of the Back Plate with its magnet facing towards the wearer’s body.
The BuddyTag and Back Plate magnets will naturally attract each other and
create a secure attachment to the clothing.
4.
To remove the BuddyTag after use, simply hold the Back Plate with one
hand while
sliding
the BuddyTag off with the other. CAREFULLY return the
Back Plate to the BuddyTag for later use.
WAVE w10 Swimmer Safety System User Guide v0721-1
Page of
19
27
User’s
Clothing
