background image

1

Massage

 

bathtub

Massage

 

bathtub

 

Page

 

10

 

of

 

11

 

Page

 

1

 

of

 

11

Plane chart

Install the dia gram

Tap takes over sketch 

8.2Press “               ”till the LCD displays “BT--C”,the Bluetooth audio 

play is turned on; press “              ”till the “BT--C” disappears, the

 Bluetooth audio play is turned off.
8.3  If Bluetooth device is not paired successfully, the LCD blinks
 "BT – C”; Bluetooth device pairing success, LCD displays “BT--C”.

8.4  When the Bluetooth audio play function is on ,press “              ”

and“                 ” to select the songs.

8.5 When the Bluetooth Audio play function is on, press“               ”for
 2seconds to operate play or pause function.

8.6 When the Bluetooth audio play function is on, press“              ”till

 the LCD blinks “VOL”, and then press“                 ”and“               ”to

 increase and decrease the volume. The volume adjusting range 
shall be 0-20,and 21in total.

9.Thermostatic heating

9.1This functions works only when the water pump surf function is on.

9.2Pres “               ”to start the thermostatic heating function.

9.2.1   2 seconds later

thermostatic heating function starts or stops 

according to the temperature

the temperature that the system defaults is 37

Controlling rule is as follows:

        

If the temperature

setting temp1

℃,

stop heating

        

If the temperature

setting temperature -1

℃,

stop heating.

9.3Press “            ”again to stop the function.

9.4Temperature setting range

35

℃-

45

(optional function)

Cold

 

wate r

Hot

 

wate r

Waterfall

 

drain

Spri nkl er

 

drai n

Clear

 

drain

Middle size jet

Control panel

Cold and hot water switch

Exchange

 

switch

Big

 

nozzle

Color light jets

Return

 

net

Pop-up hand shower

Waterfall intake

Small

 

nozzle

Pillow

Drainage

Return

 

net

Drainage

Big

 

nozzle

Summary of Contents for Luxury M-1313







Reviews: