User’s Guide
IMPORTANT:
Read this manual before proceeding with installation of the bathtub and keep it
with the other
accompanying documents.
This manual is valid for the installation of tubs both with and without whirlpool.
Massage
bathtub
Page
1
of
1
1
1
9.5Temperature adjustment
9.5.1When the thermostatic heating function is on, press the Function
setting button “ ”till “
℃"
on LCD blinks, then press “ ”
and“ ” to adjust the temperature. During the adjusting,
LCD displays the setting temperature, then the temperature shall be
increased /decreased 1
℃
after press“ ”and
“ ”
once
；
stop adjusting for 5 seconds
，
LCD shall display the current water
temperature.
9.6 If the temperature sensor occurs error, LCD displays “E1” and the
controller sounds “di…di…”, in this case the heater cannot be start.
10.Ozone
When the pump is working, press“ ”to turn on or turn off
the ozone. The ozone will be turned off automatically in 10 minutes.
11Drainage function after power off
Ensure that the main power supply is not cut-off. After turning off the
control panel, the drainage valve will be automatically turned on and
shut-off after 30 minutes.
(optional function)
SIZE:1700X1700X720mm
MODEL:M
-
1313
