WATTWHEELS LTD
8
BRAKES
The Scout electric bikes are equipped Tektro E350 hydraulic disk brakes. Please be aware the hydraulic disk brakes are very strong, so care is to be
taken braking initially, when getting familiar with the bike. The front wheel brake is located on right hand side with the rear wheel brake on the left.
For riders which prefers the brakes the other way around please get your nearest bike shop to switch over if required.
TYRE PRESSURE
To avoid flats, keep tyre pressure at the recommended PSI. On off-road terrain a slightly lower PSI will provide more grip, but flats can occur. We
recommend a pressure of between 5-35PSI. Scout tyres can be run at a very low PSI for greater traction over looser surfaces like sand, snow or mud.
FOLDING
To fold the bike three step are required.
PLEASE MAKE SURE THE BIKE IS TURNED OFF BEFORE FOLDING AND WATCH YOUR FINGERS
1
st
–
fold in the pedals. To do this hold the pedal and press inwards and then push down.
2
nd
- fold down the handlebars. Lift the little silver button and at the same time pull the latch down to release. The handlebars will then fold over.
