WATTWHEELS LTD
10
ADJUSTING THE SEAT HEIGHT
Loosen the seat clamp using a 5mm hex key to raise or lower the seat height to the required position.
Ensure the seat post and seat are properly adjusted before riding. Do not raise the seat post beyond the
MINIMUM INSERTION
marking etched onto the seat
post. If your seat post extends from the frame beyond these markings, the seat post or frame may break, which could cause you to lose control and fall. Prior
to first use, be sure to tighten the seat clamp properly. A loose seat clamp or seat post binding bolt can cause damage to the bicycle or can cause you to lose
control or fall. Periodically check to make sure these the seat clamp is properly tightened.
RIDER COMFORT
To obtain maximum comfort, the rider should not overextend his or her arms reach when riding. To obtain the most comfortable riding position and
offer the best possible pedalling efficiency,
the seat height should be set correctly in relation to the rider’
s leg length. The correct saddle height should
not allow leg strain from over extension, and the hips should not rock from side to side when pedalling. While sitting on the bicycle with one pedal at
its lowest point, place the ball of your foot on that pedal. The correct saddle height will allow the knee to be slightly bent in this position.