Each WattStopper BZ series power
pack can supply power for 4 UT-305
sensors. When using more sensors
than this, multiple power packs are
required.
Refer to the wiring diagram on the next
page for the following procedures:
Connect the
low voltage
:
• RED wire (+24VDC) from power pack
to the +
24V
terminal on the sensor.
• BLACK wire (Return) from power
pack to
Common
terminal on the
sensor.
Wiring a
SINGLE LIGHTING LOAD CONTROLLED BY OCCUPANCY
–connect:
• BLUE wire from power pack to Control Out terminal on sensor.
To add a
MANUAL SWITCH such as the LVS-1 Momentary Toggle Switch, or RS2-3
Low Voltage Momentary Switch to the above applications–connect:
• Wire from one side of switch to Common terminal on sensor.
• Wire from other side of switch to Man Switch terminal on sensor.
WIRING DIRECTIONS
CAUTION
TURN POWER OFF AT THE CIRCUIT BREAKER BEFORE
INSTALLING POWER PACKS OR SENSORS.
Call 800.879.8585 for Technical Support
UT-305
Ultrasonic
Occupancy Sensor
U.S.Patents:
5,640,113
Patent Pending
40kHz Ultrasonic
+24VDC/VAC
Connect to Watt Stopper
Class 2 Power Packs
For Indoor Use Only
03624r2
Control Out.
Man. Switch
+24V
Common
LISTED
88T9
Appliance
Control
www.wattstopper.com
800.879.8585
