WIRING AND INSTALLATION (CONTINUED)
Connecting to a Power
Pack
Wire the sensor to a WattStopper
power pack as shown:
•
RED wire from sensor to
RED wire on power pack.
•
BLACK (common) wire from
sensor to BLACK wire on
power pack.
•
BLUE wire from sensor to
BLUE wire on power pack.
6
Call 800 .879 .8585 or 972 .578 .1699 For Technical Support
EW Sensor
Lighting
Load
White (Neutral)
Red (Load)
Red (Line)
White
Black
Hot
N
Power
Pack
Red
Black
Blue
Switch
(BLU)
Control Output 24VDC
(BLK)
Control Return
(RED)
+24VDC
Connecting to a DM-115-WP HID
Dimming Module
Wire the sensor to a WattStopper
DM-115-WP as shown below:
•
RED wire from sensor to RED
wire from the DM-115-WP
cable.
•
BLACK (common) wire from
sensor to BLACK wire from
the DM-115-WP cable.
•
BLUE wire from sensor to
WHITE wire from the DM-115-
WP cable.
Control Output from Sensor (Blue)
Common (Black)
+24 VDC to Sensor (Red)
DM-105-WP
EW-105-24 or EW-205-24
Motion Sensor
Ballast
Red
Black
White
Connecting to a DM-105 HID Dimming Module
Wire the sensor to a WattStopper DM-105 as shown below:
•
RED wire from sensor to terminal 1 (+24VDC Output) on the
DM-105.
•
BLACK wire (common) from sensor to terminal 2 on the
DM-105.
•
BLUE wire from sensor terminal 3 (Control In) on the DM-105.
Control Output from Sensor (Blue)
Common (Black)
+24 VDC to Sensor (Red)
EW-105-24 or EW-205-24
Motion Sensor
1
5
4
3
2
CONTROL OUTPUT
CONTROL IN #2
+24VDC OUTPUT
RETURN (COMMON)
CONTROL IN #1
5
1
2
3
4
DM-105
Terminals
