background image

IS-TK-DL

Installation

The Watts TK-DL Computerized Backfl ow Tester

 is an advanced piece of test equipment designed to make pressure and differ-

ential gauges obsolete in the testing of backfl ow assemblies. Two solid-state, high-resolution pressure transducers provide the inter-
face to the computer. With 32K of memory, battery back up, 48 character super-twist display, 16 function keyboard and high-effi cien-
cy thermal printer, the TK-DL is equipped to provide real time data handling and the outputs required to test, validate and certify every 
backfl ow assembly. (See operating manual for details).  The TK-DL allows you to download your test results into a personal computer 
for permanent storage. In addition, the TK-DL menu driven software program allows for customizing of printed header and footer.

GENERAL INFORMATION
Before connecting hoses to tester, be sure to fl ush test cocks on backfl ow assembly.

CAUTION:  To avoid freeze damage to the test kit, it should be stored in a dry warm area when not in use.

Watts TK-DL
(in carrying case - sold separately)

Watts TK-DL

Limited Warranty:

 Watts Regulator Co. (the “Company”) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of 

original shipment.  In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.  

THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT.  THE COMPANY MAKES NO OTHER 
WARRANTIES, EXPRESS OR IMPLIED.  THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special 
or consequential damages, including without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting 
from labor charges, delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no 
control.  This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.  
Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages.  Therefore the above 
limitations may not apply to you.  This Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State.  You should consult applicable state laws to 
determine your rights.  

SO FAR AS IS CONSISTENT WITH APPLICABLE STATE LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF ORIGINAL SHIPMENT.

Watts TK-DL

Digital Print-out Test Kit for Backfl ow Preventer Assemblies

IS-TK-DL.indd   1

9/5/08   2:18:57 PM

Summary of Contents for TK-DL









Reviews: