tekmar Control Systems Ltd., Canada
tekmar Control Systems, Inc., U.S.A.
Head Office: 5100 Silver Star Road
Vernon, B.C. Canada V1B 3K4
(250) 545-7749 Fax. (250) 545-0650
Web Site: www.tekmarcontrols.com
Product design, software and literature are Copyright © 2005 by:
tekmar Control Systems Ltd. and tekmar Control Systems, Inc.
16 of 16
All specifications are subject to change without notice.
Printed in Canada. D 704 - 04/05.
Limited Warranty Statement
RMC - Radiant Mixing Control (Variable Speed)
Control
- Microprocessor PID control: This is not a safety (limit) control
Ambient conditions
- Indoor use only, 32 to 185°F (0 to 85°C), <90% RH non-condensing
Power Supply
- 120 V (ac) +/- 10% 50/60 Hz 720 VA
Var. Pump
- 120 V (ac) 1 A 1/12 hp, fuse T1 A 250 V
Sys / Pmp Relay
- 120 V (ac) 5 A 1/4 hp, pilot duty 240 VA
Boiler Relay
- 120 V (ac) 5 A 1/4 hp, pilot duty 240 VA
Demand
- 24 V (ac) 0.1 VA or Dry contact
Sensors
- NTC thermistor, 10 K Ohm @ 77°F (25°C +/- 0.2°C)
ß
=3892
Included
- Outdoor Sensor 070, Universal Sensors 071 and 082
Mixing
Station 70
4
Cleaning
Technical Data
The exterior of the control can be cleaned using a damp cloth. Do not use any solvents. Moisten the cloth and wring out any excess
water before cleaning the control.
Limited Warranty The liability of tekmar under this warranty is lim-
ited. The Purchaser, by taking receipt of any tekmar product (“Prod-
uct”), acknowledges the terms of the Limited Warranty in effect at
the time of such Product sale and acknowledges that it has read and
understands same.
The tekmar Limited Warranty to the Purchaser on the Products sold
hereunder is a manufacturer’s pass-through warranty which the Pur-
chaser is authorized to pass through to its customers. Under the Limited
Warranty, each tekmar Product is warranted against defects in workman-
ship and materials if the Product is installed and used in compliance
with tekmar’s instructions, ordinary wear and tear excepted. The pass-
through warranty period is for a period of twenty-four (24) months from
the production date if the Product is not installed during that period, or
twelve (12) months from the documented date of installation if installed
within twenty-four (24) months from the production date.
The liability of tekmar under the Limited Warranty shall be limited to, at tek-
mar’s sole discretion: the cost of parts and labor provided by tekmar to repair
defects in materials and / or workmanship of the defective product; or to the
exchange of the defective product for a warranty replacement product; or
to the granting of credit limited to the original cost of the defective product,
and such repair, exchange or credit shall be the sole remedy available from
tekmar, and, without limiting the foregoing in any way, tekmar is not respon-
sible, in contract, tort or strict product liability, for any other losses, costs,
expenses, inconveniences, or damages, whether direct, indirect, special,
secondary, incidental or consequential, arising from ownership or use of the
product, or from defects in workmanship or materials, including any liability
for fundamental breach of contract.
The pass-through Limited Warranty applies only to those defective Prod-
ucts returned to tekmar during the warranty period. This Limited Warranty
does not cover the cost of the parts or labor to remove or transport the
defective Product, or to reinstall the repaired or replacement Product, all
such costs and expenses being subject to Purchaser’s agreement and
warranty with its customers.
Any representations or warranties about the Products made by Purchaser to
its customers which are different from or in excess of the tekmar Limited War-
ranty are the Purchaser’s sole responsibility and obligation. Purchaser shall
indemnify and hold tekmar harmless from and against any and all claims,
liabilities and damages of any kind or nature which arise out of or are related
to any such representations or warranties by Purchaser to its customers.
The pass-through Limited Warranty does not apply if the returned Product
has been damaged by negligence by persons other than tekmar, accident,
fire, Act of God, abuse or misuse; or has been damaged by modifications,
alterations or attachments made subsequent to purchase which have not
been authorized by tekmar; or if the Product was not installed in compliance
with tekmar’s instructions and / or the local codes and ordinances; or if due to
defective installation of the Product; or if the Product was not used in compli-
ance with tekmar’s instructions.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, WHICH THE GOVERNING LAW ALLOWS PARTIES TO CONTRACTU-
ALLY EXCLUDE, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, DURABILITY
OR DESCRIPTION OF THE PRODUCT, ITS NON-INFRINGEMENT OF ANY REL-
EVANT PATENTS OR TRADEMARKS, AND ITS COMPLIANCE WITH OR NON-VIO-
LATION OF ANY APPLICABLE ENVIRONMENTAL, HEALTH OR SAFETY LEGISLA-
TION; THE TERM OF ANY OTHER WARRANTY NOT HEREBY CONTRACTUALLY
EXCLUDED IS LIMITED SUCH THAT IT SHALL NOT EXTEND BEYOND TWENTY-
FOUR (24) MONTHS FROM THE PRODUCTION DATE, TO THE EXTENT THAT
SUCH LIMITATION IS ALLOWED BY THE GOVERNING LAW.
Product Warranty Return Procedure
All Products that are believed to have
defects in workmanship or materials must be returned, together with a written
description of the defect, to the tekmar Representative assigned to the territory
in which such Product is located. If tekmar receives an inquiry from someone
other than a tekmar Representative, including an inquiry from Purchaser (if
not a tekmar Representative) or Purchaser’s customers, regarding a potential
warranty claim, tekmar’s sole obligation shall be to provide the address and
other contact information regarding the appropriate Representative.
The installer must ensure that this control and its wiring are isolated and/or shielded from strong sources of electromagnetic noise.
Conversely, this Class B digital apparatus complies with Part 15 of the FCC Rules and meets all requirements of the Canadian Interfer-
ence-Causing Equipment Regulations. However, if this control does cause harmful interference to radio or television reception, which
can be determined by turning the control off and on, the user is encouraged to try to correct the interference by reorienting or relocating
the receiving antenna, relocating the receiver with respect to this control, and/or connecting the control to a different circuit from that to
which the receiver is connected.
