IOM-T-294EXP
2214
© 2022 tekmar
3
This is a safety-alert symbol . The safety alert sym-
bol is shown alone or used with a signal word
(DANGER, WARNING, or CAUTION), a pictorial
and/or a safety message to identify hazards .
When you see this symbol alone or with a signal
word on your equipment or in this Manual, be alert
to the potential for death or serious personal injury .
• It is the installer's responsibility to ensure that this control
is safely installed according to all applicable codes and
standards .
• Improper installation and operation of this control could
result in damage to the equipment and possibly even
personal injury or death .
• This control is not intended for use as a primary limit
control . Other controls that are intended and certified as
safety limits must be placed into the control circuit .
Do not attempt to service the control . There are no user
serviceable parts inside the control . Attempting to do so
voids warranty .
To avoid serious personal injury and damage to the equipment:
It is your responsibility to ensure that this control is safely
installed according to all applicable codes and standards .
tekmar
®
is not responsible for damages resulting from
improper installation and/or maintenance .
• Read Manual and all product labels BEFORE
using the equipment . Do not use unless you
know the safe and proper operation of this
equipment .
• Keep this Manual available for easy access by
all users .
• Replacement Manuals are available at
tekmarControls .com
Important Safety Information
This pictorial alerts you to electricity, electrocution,
and shock hazards .
Double insulated .
This symbol identifies hazards which, if not
avoided, could result in death or serious injury .
This symbol identifies hazards which, if not
avoided, could result in minor or moderate
injury .
This symbol identifies practices, actions, or
failure to act which could result in property
damage or damage to the equipment .
