28
IOM-T-294
2205
© 2022 tekmar
Parameter
Range
Description
STEP 5 IS REPEATED FOR EACH AVAILABLE BOILER 2 TO 16
STEP 6
Commission wizard ends and all outputs are turned off .
A Commissioning Report is provided at the end of the
commissioning wizard .
The
circle-check
indicates that step was completed successfully .
The
Circle-minus
indicates that step was incomplete and corrective
action is required .
Parameter
Range
Description
SECURITY
STEP 1
Set a personal passcode . This is required when a passcode has already been set .
STEP 2
Confirm the personal passcode . This is required when a passcode has already been set .
REQUIRE
PASSCODE
Off or On
Default: Off
Select if a passcode is required to enter the Home screen .
PASSCODE
Select to change the personal passcode .
RESET
FACTORY RESET
Select to load factory defaults for all settings . This does not deregister the control from the Watts OnSite application .
TEKMARNET
DEVICE RESET
Select to reset the tekmarNet communications . This removes any lost tN4 devices from the control .
Settings (8 of 8)
