10
IOM-UpGradeKit-SentryPlusAlert2
2013
EDP# 2916013
© 2020 Watts
Buttons
The only buttons that you might need to use are the RESET and
TEST buttons. See the section below for more information. Both
can be used by user.
RESET
Press this to reset the Cellular Gateway and restart the device.
This will cause all ongoing operations to cease.
Note:
You can also perform a full reset by removing power to the
Cellular Gateway for 10 seconds and then plugging it back in.
TEST
Press to have a test notification sent.
Note:
The unit must have already been registered and commu-
nication preferences set for these notifications to be sent.
Terminals
Terminals wire to Control Box (PWR, GND, MOD+, MOD-).
Terminals labeled INPUT 1 & INPUT 2 are reserved for future use.
Power Outlet
Ground
MOD+
MOD-
Cellular Gateway
Cellular
Connection to
Internet
Wired to Control Box
