2
1. Presentation
- The BT-WR02 RF receiver is a Wall mounting receiver, designed to control heating regulation
system with a wireless thermostat BT-XX02 RF / BT-XX03 RF.
- This couple (Thermostat Receiver) can also be managed by a Central to have full control of your
heating installation from one point.
2. Technical characteristics
A
(RF configuration button)
B
(green/red)
C
(red)
D
(green)
/
Green
/
/
Power ON
Short press
Green
/
/
Instantaneous RF transmission
3sec press
Green
/
Green flash
Thermostat or central RF init.
15sec press
Red blinking
/
Green blinking
Reset of the receiver
/
Green
Red
/
Heating demand
/
Green
/
Green flash
RF reception
/
Green
/
Permanently green
blinking
RF alarm
Environment. (Temperatures)
Operating /shipping et storage
0°C - +40°C
-10°C to +50°C
Power supply
230Vac 50Hz
Electrical protection
Class II - IP33
Output
Maximum Load
Relay 10A - 250VAC
Up to 10A - 250Vac 50Hz (2 wires L,N)
Radio Frequency &
RF Receiving distance
868MHz < 10mW (Bidirectional communication)
Range of approximately 100m in open space
Range of approximately 30m in residential environment
CE Directives
Your product has been designed in
conformity with the European Directives.
EN 60730-1:2017 / EN 60730-2-9:2021 / EN IEC 61000-3-2:2019 + AMD1:2021
EN IEC 61000-3-3:2013 + AMD1:2017 + AMD2:2021 / EN 55014-1:2017
EN 55014-2:2015 / EN 55024:2010 + A1:2015 / ETSI EN 301 489-3 V2.1.1
ETSI EN 301 489-1 V2.2.3 / ETSI EN 300 220-1 V3.1.1 / ETSI EN 300 220-2 V3.2.1
EN IEC 63000:2018 / Regulation (EU) 2015/1188 / Regulation (EU) 2013/813
Classification/Contribution
IV / (2%)
EN
A
D
B
C
