background image

2

System Specifications

Maximum Pressure: 

All Systems - 100psi (6 .8 bar)
Minimum Pressure: 

All Systems - 20psi (1 .4 bar)  
Maximum Temperature: 100°F (38°C) 

Minimum Temperature: 40°F (4 .4°C)
Feed Water Quality: pH 6 .5 to 8 .5
Chlorine < 2ppm
Iron (maximum) 0 .3 mg/l
Manganese (maximum) 0 .05 mg/l
Oil & H2S- None allowed
For all other feed water quality requirements abide by the current 

USEPA Safe Drinking Water Act standards .
Inlet/Outlet Connections: 

3

8

" (10mm) NPT for models  

QTCBMX-1S-1M, QTCBMX-1L-1M, and QTCBMX-1L- .5M .  

All other systems have 1/2" (15mm) NPT connections 
Maximum Flow Rate: 

System Flow Rate and Capacity

System Model

Flow Rate

Chlorine Capacity

QTCBMX-1S-1M 

 1.5 GPM  

(5.7 LPM) 

20,000 Gallons

QTCBMX-2S-1M 

 1.5 GPM  

(5.7 LPM) 

20,000 Gallons

QTCBMX-3S-1M 

3 GPM  

(11.4 LPM)

40,000 Gallons

QTCBMX-4S-1M 

4.5 GPM  

(17.1 LPM)

60,000 Gallons

QTCBMX-1L-1M 

 1.5 GPM  

(5.7 LPM) 

22,000 Gallons

QTCBMX-2L-1M 

 1.5 GPM  

(5.7 LPM) 

22,000 Gallons

QTCBMX-3L-1M 

3 GPM  

(11.4 LPM)

44,000 Gallons

QTCBMX-4L-1M

 4.5 GPM  

(17.1 LPM)

66,000 Gallons

QTCBMX-5L-1M

6 GPM  

(22.8 LPM)

88,000 Gallons

QTCBMX-1L-.5M

1.5 GPM  

(5.7 LPM) 

NA

QTCBMX-2L-.5M

3 GPM  

(11.4 LPM)

NA

QTCBMX-3L-.5M

 4.5 GPM  

(17.1 LPM)

NA

QT Cube Max line is available in different configurations depending 

upon filtration and flow requirements . 

System Replacement Filters

System Model

Filter Ordering Code

Frequency

Description

QTCBMX-1S-1M

QTCM15S*

6 Months

15" QT 0.5 Micron Carbon Block 

with Phosphate Scale Control

QTCBMX-2S-1M

HSR-L-SED-5M

6 Months

20" 5 Micron Sediment Pre Filter

QTCM15

6 Months

15" QT 0.5 Micron Carbon Block 

with Phosphate Scale Control

QTCBMX-3S-1M

HSR-L-SED-5M

6 Months

20" 5 Micron Sediment Pre Filter

QTCM15

6 Months

15" QT 0.5 Micron Carbon Block 

with Phosphate Scale Control (2)

QTCBMX-4S-1M

HSR-L-SED-5M

6 Months

20" 5 Micron Sediment Pre Filter

QTCM15

6 Months

15" QT 0.5 Micron Carbon Block 

with Phosphate Scale Control (3)

QTCBMX-1L-1M

QTCM20S*

6 Months

20" QT 0.5 Micron Carbon Block 

with Phosphate Scale Control

QTCBMX-2L-1M

HSR-L-SED-5M

6 Months

20" 5 Micron Sediment Pre Filter

QTCM20

6 Months

20" QT 0.5 Micron Carbon Block 

with Phosphate Scale Control

QTCBMX-3L-1M

HSR-L-SED-5M

6 Months

20" 5 Micron Sediment Pre Filter

QTCM20

6 Months

20" QT 0.5 Micron Carbon Block 

with Phosphate Scale Control (2)

QTCBMX-4L-1M

HSR-L-SED-5M

6 Months

20" 5 Micron Sediment Pre Filter

QTCM20

6 Months

20" QT 0.5 Micron Carbon Block 

with Phosphate Scale Control (3)

QTCBMX-5L-1M

HSR-L-SED-5M

6 Months

20" 5 Micron Sediment Pre Filter

QTCM20

6 Months

20" QT 0.5 Micron Carbon Block 

with Phosphate Scale Control (4)

QTCBMX-1L-.5M

QTCMX20S*

6 Months

20" QT 0.5 Micron Ultra Filtration 

Membrane with Phosphate Scale 

Control

QTCBMX-2L-.5M

QTCMX20

6 Months

20" QT 0.5 Micron Ultra Filtration 

Membrane with Phosphate Scale 

Control (2)

QTCBMX-3L-.5M

QTCMX20

6 Months

20" QT 0.5 Micron Ultra Filtration 

Membrane with Phosphate Scale 

Control (3)

NOTICE

Filter cartridges should be changed at end of filter life, due to lack of 

filtering performance, or whenever a 15 psi pressure drop or greater 

is experienced during normal operation, whichever comes first .
For all replacement filters and components contact your authorized 

Hydro-Safe Foodservice representative .
*The QTCM15S, QTCM20S and QTCMX20S are the same filters as the 

QTCM15, QTCM20 and QTCMX20 respectively . Only the label position has 

been changed so that the label faces forward on single cartridge systems .

NOTICE

Cartridge capacities are estimates and may be less depending on 

incoming water quality .

Notice to Installer

•  Do not discard this manual after installation. This manual contains 

important operation, maintenance and precautionary information . 

Please present this manual to the user/owner/operator after  

installation .

•  It is strongly suggested that you read this manual before installing 

system to ensure the best possible installation .

•  Installation must comply with all local and state plumbing codes 

and regulations . 

•  Connect the system to cold water supply only. Water Temperature 

cannot exceed 100°F (38°C) .

Replacement Filters

Summary of Contents for QTCBMX-1S-1M









Reviews: