10
Reverse Osmosis Controller
Operations and Maintenance Model #R23-ROC-4
TABLE 1. SPECIFICATIONS
Inputs
Tank level switches
(2) Normally-Closed. Can be used with a single level switch.
Inlet pressure switch
Normally-Open.
Pretreat lockout switch
Normally-Open.
High pressure switch
Normally-Open.
(opt) Controller Power
24 VAC, 60/50Hz
Permeate Conductivity
0-3000 PPM, 0-6000 µs (standard sensor, CP-1, K=.75)
Feed Conductivity (opt)
0-3000 PPM, 0-6000 µs (standard sensor, CP-1, K=.75)
Output Ratings
Feed Solenoid
24 VAC – 1 amp
Flush Solenoid
24 VAC – 1 amp
Divert (opt)
24 VAC – 1 amp
Motor Contactor Coil
24 VAC – 1 amp
Circuit Protection
Main Power Fuse
F1 5 x 20 mm 2 Amp
Relay/XFMR Fuse
F2 5 x 20 mm 0.125 Amp
Other
Dimensions
11.5" tall, 9.3" wide, 6.7" deep. Nema 4X non-metallic (10 x 8 x 6)
13.5" tall, 11.4" wide, 6.7" deep. Nema 4X non-metallic (12 x 10 x 6)
15.5" tall, 13.3" wide, 7.7" deep. Nema 4X non-metallic (14 x 12 x 7)
Weight
4.2 lb. (10 x 8 x 6) (Enclosure, CPU-4 and TB-3 only.)
6.0 lb. (12 x 10 x 6) (Enclosure, CPU-4 and TB-3 only.)
10.6 lb. (14 x 12 x 7) (Enclosure, CPU-4 and TB-3 only.)
Environment
0-50°C, 10-90%RH (non-condensing)
E. Controllers
The controller for this system is the ROC-4 controller. This is a
microprocessor-based controller with a product water conductivity
meter. A separate manual for this controller begins on the next page.
Summary of Contents for Pure Water PWR4021 Series
