background image

ISOMIX F-IM-DE-W-UK-01-2021-Rev4 | Part no. 10070292

Watts Industries Deutschland GmbH

Godramsteiner Hauptstr. 167 • 76829 Landau • Deutschland

Tel. +49 6341 9656 0 • Fax +49 6341 9656 560

[email protected] • www.wattswater.eu

© 2021 Watts

The descriptions and photographs contained in this product specification sheet are supplied by way of information only and are not binding.  

Watts Industries reserves the right to carry out any technical and design improvements to its products without prior notice. Warranty: All sales and contracts for sale are expressly 

conditioned on the buyer’s assent to Watts terms and conditions found on its website at www.wattswater.eu/gtc/. Watts hereby objects to any term, different from or additional to Watts 

terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Watts. 

11  Disposal

Potential for contamination of the envi-
ronment and groundwater from improper 
disposal!

The legal regulations and guidelines 
in the country of operation must be 
observed when disposing of components 
and operating materials.

1.  Ensure that all assemblies and components are 

de-energized.

2.  Disassemble the  Isomix-F properly or commission a spe-

cialist company to do so.

3.  Sort the assemblies and component parts into recyclable 

materials, hazardous substances and operating materials.

4.  Dispose of the assemblies and components in accord-

ance with local laws and regulations or take them to be 
recycled.  

11.1 Return to the manufacturer

Get in contact with the manufacturer if you would like to 
return the Isomix-F or parts of it.

11.2   Notification of administrative bodies and 

the manufacturer

Inform the manufacturer of decommissioning and disposal of 
the Isomix-Ffor statistical purposes.

12  Warranty

WATTS products are tested extensively. WATTS therefore guar-
antees only to replace or repair components of the products 
supplied free of charge – at the sole discretion of WATTS – if, 
in the opinion of WATTS, they exhibit verifiable manufacturing 
faults. Warranty claims due to defects or defects of title may be 
asserted within one (1) year of delivery/transfer of risk. Excluded 
from the warranty is damage attributable to normal product use 
or friction and to damage resulting from modifications or unau-
thorized repairs to the products, for which WATTS rejects all 
claims for compensation (direct or indirect). (For more detailed 
information, please refer to our website.) In all cases, supply 
is subject to the General Terms and Conditions, which can be 
found on 

www.wattswater.eu/gtc/

.

Summary of Contents for Isomix-F











Reviews: