background image

FRG3015-F-RV-IM-DE-W-UK-02-2022-Rev.0.1 | Part no. 10019421

Watts Industries Deutschland GmbH

Godramsteiner Hauptstr. 167 • 76829 Landau • Deutschland

Tel. +49 6341 9656 0 • Fax +49 6341 9656 560

[email protected] • www.wattswater.eu

© 2022 Watts

The descriptions and photographs contained in this product specification sheet are supplied by way of information only and are not binding.  

Watts Industries reserves the right to carry out any technical and design improvements to its products without prior notice. Warranty: All sales and contracts for sale are expressly 

conditioned on the buyer’s assent to Watts terms and conditions found on its website at www.wattswater.eu/gtc/. Watts hereby objects to any term, different from or additional to Watts 

terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Watts. 

11  Disposal

!

!

 

WARNING

Potential for contamination of the

environment and groundwater from improper disposal!

The legal regulations and guidelines in the country of 
operation must be observed when disposing of compo-
nents and operating materials.

1.  Ensure that all assemblies and components are 

de-energized.

2.  Disassemble the  FRG3015-F RV properly or commission 

a specialist company to do so.

3.  Sort the assemblies and component parts into recyclable 

materials, hazardous substances and operating materials.

4.  Dispose of the assemblies and components in accord-

ance with local laws and regulations or take them to be 
recycled.  

11.1 Return to the manufacturer

Get in contact with the manufacturer if you would like to return 
the FRG3015-F RV or parts of it.

11.2   Notification of administrative bodies and 

the manufacturer

Inform the manufacturer of decommissioning and disposal of 
the FRG3015-F RV for statistical purposes.

12  Warranty

WATTS products are tested extensively. WATTS therefore 
guarantees only to replace or repair components of the 
products supplied free of charge – at the sole discretion of 
WATTS – if, in the opinion of WATTS, they exhibit verifia-
ble manufacturing faults. Warranty claims due to defects or 
defects of title may be asserted within one (1) year of deliv-
ery/transfer of risk. Excluded from the warranty is damage 
attributable to normal product use or friction and to dam-
age resulting from modifications or unauthorized repairs to 
the products, for which WATTS rejects all claims for com-
pensation (direct or indirect). (For more detailed information, 
please refer to our website.) In all cases, supply is subject to 
the General Terms and Conditions, which can be found on 

www.wattswater.eu/gtc/

.

Summary of Contents for FRG3015-F RV











Reviews: