8
Filling Carbon Media
1. Place tape over the top of the distributor tube to prevent
Carbon from getting inside the distributor tube as shown in
Diagram A. The tube should be completely covered as shown
in Diagram B.
2. Put the blue media funnel into the top of the tank as shown in
Diagram C. Slowly pour the new carbon media into the funnel
until all media is inside the vessel.
3. Remove the funnel, and the tape from the distributor tube.
4. Reinstall the tank head and connect system to bypass valve
shown on Diagram D.
5. Proceed with Start Up on page 4.
Diagram C
Diagram D
Diagram A
Diagram B
Summary of Contents for E-Treat ETREATWCS
Page 12: ......
