background image

7

CIVIC1-MOI-IT-W-ML-09-18-Rev.1

Watts Water Technologies, Inc.

EN

Waste disposal of electrical and elec-

tronic equipment (WEEE): pursuant to 

Italian Legislative Decree no. 49 of 14 

March 2014, implementing Directive 

2012/19/EU on waste electrical and 

electronic equipment (WEEE). 
The crossed-out wheeled bin symbol 

indicates that the product must be 

collected separately from other waste 

at the end of its useful life. 
The user must deliver equipment at the end of its useful life to 

the designated separate collection facilities for electrical and 

electronic equipment. Proper separate collection of disused 

WEEE to be sent for recycling, treatment and environmentally 

sound disposal helps to avoid possible negative effects on 

the environment and on health and facilitates recycling of the  

materials that make up the equipment. 
For the management of the recovery and disposal of household 

appliances, Watts Industries Italia srl is a member of the Italian 

consortium for recycling small household appliances (Consorzio 

Nazionale Riciclo Piccoli Elettrodomestici - EcoPED). 
Illegal disposal of the product by the user is punishable by 

administrative penalties under applicable legislation.

The descriptions and photographs contained in this product specification sheet are supplied by way of information only and are not binding. Watts Industries reserves the right to carry out any technical 

and design improvements to its products without prior notice. Warranty: All sales and contracts for sale are expressly conditioned on the buyer’s assent to Watts terms and conditions found on its  

website at www.wattsindustries.com. Watts hereby objects to any term, different from or additional to Watts terms, contained in any buyer communication in any form, unless agreed to in a writing  

signed by an officer of Watts. 

Guarantee

Watts products are thoroughly tested. The said guarantee covers solely replacement or – at the full sole discretion of WATTS - repair, free of charge, of those components of the goods supplied which 
in the sole view of Watts present proven manufacturing defects. The period of limitation for claims based on defects and defects in title is two years from delivery/the passage of risk. This warranty 
excludes any damage due to normal product usage or friction and does not include any modified or unauthorized repair for which Watts will not accept any request for damage (either direct or indirect) 
compensation (for full details see our website). All sales subject to the Watts terms to be found on www.wattsindustries.com 

Installation data

Installation data

Installer’s stamp

Control unit installation date:

Detector replacement date:

RESET

TEST

CIVIC1

105

33

48

58

45 62 90

66

45

90

N1

 - CIVIC1 control unit

B1 -

 UR13 or UR20S detector

Y1 -

 NA gas solenoid valve (Vaux: 24÷230Vac)

L1 -

 Failure alert device (12 V/300 mA max)

Overall dimensions

Vaux

12 Vac/dc

Vaux

12 Vac/dc

N1

B1

L1

Y1

NO  NC

UR20S

UR13

C S A

C S A

+

-

+

-

Alarm

-1

2..

.24

V

+

4...

20m

A

+

12..

.24

V

CIVIC1

Connection diagrams

Control unit with NA solenoid valve, negative mode.

CIVIC1 control unit

UR13 (or UR20S) detectors

UR.20.S detectors 

Depending on model (see dedicated technical data sheet).

Summary of Contents for CIVIC1













Reviews: