Watts BT-DRF, Quick Installation Manual

Page: 11 / 72

11
3. Working mode definition
How to change the working mode?
- Open the small center cover to have access to the navigation keys
(
◄
) or (
►
) .
- You can now press theses keys to display the working mode line.
Move the frame cursor on the desired working mode and press
(OK) to enter in the operating mode you have chosen.
3.1 Manual mode Comfort
Manual working mode, the comfort setting temperature will be followed all the time.
By pressing
(-) or (+) keys, the comfort setting temperature starts to blink and can be adjusted.
3.2 Manual mode, Reduced
Manual working mode, the reduced setting temperature will be followed all the time.
By pressing
(-) or (+) keys, the reduced setting temperature starts to blink and can be adjusted.
3.3 OFF mode
Use this mode if you need to switch off your installation.
Be Careful: In this mode your installation can freeze.
- At any time, when display is off, press on the (Ok) key to display a few seconds the current temperature and time.
- To restart your installation, use the navigation keys (
◄
) or (
►
) .
3.4 Anti-freeze mode
Use this mode if you want to protect your installation against freezing. (During holidays…)
- The anti-freeze setting temperature is fixed and can be adjusted in the parameter menu number
06
‘
HG
’ , see chapter 6. (Default value 10°C)
3.5 Timer mode
The Timer mode allows you to adjust, the temperature and the duration for a special time.
This function can be used when you stay at home for several days, or if you want to override the program for some time (reception...)
- You can first adjust, the desired setting temperature with
(-) or (+) , press (OK) to start the function. (Default value 22°C)
- In a second time, you can adjust the duration in hours “H” if below 24H, then in day “ d ” with (-) or (+) , press (OK) to validate.
The logo will be blinks and the number of hours /days left is displayed until the end of the period.
If you want to stop the Timer function before the end, set the duration period to “ no ” with (-) key.
4. Special function
4.1 Keyboards lock Function
Use this function to prevent all change of your settings (In a child room, public area…)
- To activate the Key lock function, first press maintain the escape key
( ) and then press simultaneously on the edition key ( ) .
- The “ ” logo will be displayed on the screen.
- Repeat the same procedure to unlock the key board.
4.2 Information
With this function You can quickly view all currents temperatures of the probe sensors connected to your thermostat (Floor, external or
outside sensor) by several presses on the escape key
( ) .This “Scroll function” is only available in the main screen.
You can view:
- The current setting temperature followed by the thermostat.