24
PMK2/EMK2-IM-DE-B-EN-01-23 Rev.0
10. Disassembly
DANGER
Electric voltage!
There is danger to life when work-
ing on electrical components.
•
Work on electrical connections should
only be carried out by qualified electri-
cians with the supply voltage switched
off and secured against reconnection.
WARNING
Installation works
There is a risk of injury if this prod-
uct is not properly installed, disas-
sembled and put into operation.
•
Make sure the personnel has received
the appropriate training.
•
Observe the safety instructions in
„Chapter 2. Safety“.
10.1 Disassembly of the actuator
For information on disassembling the actu-
ator, refer to the manufacturer documenta-
tion supplied with the actuator.
10.2 Disassembly of the ball valve
from the pipeline
If the unit is to be replaced by a structurally
identical one, it is necessary to loosen the
pipe ends of the thread of the ball valve and
then remove it.
11. Disposal
•
Proper disposal of the products is the
responsibility of the customer. Dispose
of the products after their use in accord-
ance with the legal requirements regard-
ing safety and environmental protection.
•
The materials used in the products are
steel, aluminum, brass, copper and var-
ious plastics.
Dispose of lubricated parts separately ac-
cording to local environmental regulations!
If you have any questions, please contact
the company bar GmbH.