Modulex EXT Commercial Series
CHAPTER 4: Installation Instructions
OMM-0160_A
• DRAFT Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page
39
of
117
4.20 Vent Starter Pieces
All vent starter pieces for the MODULEX EXT 1500 through 3060 can be purchased directly from the
vent manufacturer.
Figure 4-13: Flue Exhaust Diameter Reduction Adaptor Kit
TABLE 4-3: Vent Part Numbers
MODEL
DIA.
MATERIAL
PART NUMBER
EXT 1500 2S
10”
Stainless
Contact vent manufacturer
Polypropylene
Contact vent manufacturer
PVC
58115-1
EXT 2300 2S
–
3000 2S
12”
Stainless
Contact vent manufacturer
Polypropylene
Contact vent manufacturer
PVC
58115-2
In the case of PVC venting, the flue venting pipe is affixed to the adapter using RTV liquid silicone and
then clamped with a worm-driven Hose Clamp.
When using non-metallic (plastic) venting materials, use schedule 40 or thicker, single-wall,
uninsulated pipes. When using non-metallic (plastic) vent systems for Canadian installations, per CSA
GASKET
European-To-American
Standard Flue Adapter
DIAMETER REDUCTION ADAPTOR
CONNECTOR
WORM-DRIVEN HOSE CLAMP
WASHERS (8 EACH)
SCREWS (8 EACH)
FLUE MANIFOLD
Example Vent Starter Piece
ACCESS POINT FOR CLEANING
(underneath)
Summary of Contents for AERCO MLX EXT 1500 2S
Page 72: ......
