Innovation Series & ReCon Water Heater
GF-5050
Venting and Combustion Air Guide
TAG-0043_0Q
12/01/2016
AERCO International, Inc.
•
100 Oritani Dr.
•
Blauvelt, New York 10913
•
Phone: 800-526-0288
Page
21
of
39
Figure 8: Vent Installation onto Water Heater – Innovation Shown
DO NOT INSULATE OR OTHERWISE WRAP VENT PIPE OR
FITTINGS.
Sections 3.2 and 3.3, below, discuss specific installation regulations for side-wall and vertical
terminations, respectively.
WARNING
VENT PIPE
WORM-DRIVE HOSE CLAMP
EXHAUST CONNECTOR
1/4" CAP SCREW [4X] (6.4 mm)
1/4" FLAT WASHER [4X] (6.4 mm)
CLEAN BOTH
SURFACES,
THEN APPLY
HIGH TEMP
SILICON
SEALANT HERE
EXHAUST MANIFOLD
