7
INSTALLATION
Figure 1: Plumbing with by pass (Standard).
Figure 3: Bypass (standard).
Figure 6:
Figure 2: Plumbing with 3-way b pass.
Figure 4: 3-way bypass plumbing.
When installing sweat copper follow state and
federal codes by using a lead free solder and
flux. Use a joint comp
o
und to seal threaded pipe.
Some home
s
use the cold water pipes for an elec-
trical ground (metal only). Whenfinished with
plumbing, a ground wire should bre connected
to the copper pipes to complete the ground cur-
cuit. Use two clamps and #4 copper wi
re
for this.
Figure 5:
