background image

14

ISOMIX HC-IM-DE-W-DE-10-2018-Rev1_enUS | Art. No. 10070436

EN

ENGLISH

10  Spare parts list

Spare part

Art. no.:

WTC-IS 

temperature limiter 

internal setting

10013410

Yonos PARA 15/6 pump

1” male thread, L = 130mm 
Wilo

10080331

UPM3 Auto L15-70 pump

1” male thread, L = 130mm 
Grundfos

10080353

Isomix-HC eccentric

1” fl. x 1” fl.

10080536

Isomix-F / HC thermal 
mixer valve 

2x1” male thread x 2x1” fl.

10080537

Isomix-HC bracket

1” male thread x 1”fl.

10080540

Climatic control regulator

CC-HC

10021172

Actuator

3-point 230 V

10027254

11  Disposal

Potential for contamination of the 
environment and groundwater from 
improper disposal!

The legal regulations and guidelines 
in the country of operation must be 
observed when disposing of components 
and operating materials.

1. Ensure that all assemblies and components are

de-energized.

2. Disassemble the  Isomix properly or commission a

specialist company to do so.

3. Sort the assemblies and component parts into recyclable

materials, hazardous substances and operating materials.

4. Dispose of the assemblies and components in

accordance with local laws and regulations or take them
to be recycled.

11.1 Return to the manufacturer

Get in contact with the manufacturer if you would like to 
return the Isomix or parts of it.

11.2  Notification of administrative bodies and 

the manufacturer

Inform the manufacturer of decommissioning and disposal of 
the Isomix for statistical purposes.

12  Warranty

WATTS products are tested extensively. WATTS therefore 
guarantees only to replace or repair components of the 
products supplied free of charge – at the sole discretion of 
WATTS – if, in the opinion of WATTS, they exhibit verifiable 
manufacturing faults. Warranty claims due to defects 
or defects of title may be asserted within one (1) year of 
delivery/transfer of risk. Excluded from the warranty is 
damage attributable to normal product use or friction and 
to damage resulting from modifications or unauthorized 
repairs to the products, for which WATTS rejects all claims 
for compensation (direct or indirect). (For more detailed 
information, please refer to our website.) In all cases, supply 
is subject to the General Terms and Conditions,  
which can be found on 

www.wattswater.de

.

Summary of Contents for Isomix-HC















Reviews: