Bob Assistant - Reference Manual
2023-04-04 - Version 1.0
22
2.3.
Battery Replacement
It is possible to change the battery once the device’s battery
has run out of energy.
To replace the battery, open the device using a
Torx 8
screwdriver by removing the 4 screws:
Remove the battery from the battery holder.
Replace the battery with the following reference:
o
HCB ER14505M
(Primary Li-SOCl
2
, Nominal capacity 2100mAh, Nominal Voltage 3.6V,
maximum continuous discharge current 400mA)
When replacing the battery, please make sure that the polarity is correct
