7
OvrC Setup
1. Verify the WB-250I is connected to the internet via your router or network switch.
2. Log in to your OvrC account.
3. Add the WB-250I by entering its MAC address and service tag (ST) number.
You can now complete setup through OvrC. Ensure your firmware is up to date,
schedule automatic reboots, set up power-on delays, etc.
Logging in to the Web Interface
You must enter the username and password to access the web interface. The
default entries are below; change these to maintain proper security (and log them
below).
Default
Custom
Username
wattbox
Password
wattbox
Note:
The new password can be no longer than 15 characters.
