Wattbike ATOM, User Manual, Page: 9 / 20

09
0 4
C O N N E C T A H E A R T R A T E M O N I T O R
Your Atom can connect to Bluetooth™, ANT+, ANT, Polar and Wattbike heart rate
belts. They can be paired up in the Wattbike Hub before starting your session.
TIP: Wear your heart rate belt before trying to connect it to your Atom. You can
also connect to your heart rate belt during a session using the Wattbike Hub
- simply tap the HR sensor in the top right hand corner of the screen and
select your belt.
1. Tap the play button to begin your session.
2. When finished, press the pause button then the stop button. The session will
be saved and uploaded to the Wattbike Hub (when an internet connection
is available).
C O N N E C T T O T R A I N I N G A P P S
A N D C Y C L I N G C O M P U T E R S
Straight out of the box, your Atom can connect to 3rd party training apps such as
The Sufferfest, Zwift and TrainerRoad.
The Atom allows control from apps with the following protocols:
1. ANT+ FE-C Trainer Control Protocol.
2. Bluetooth Smart Trainer Control.
Many apps have the ability to control resistance over the above protocols, which
offer a smart training experience.
If your chosen training app does not have the ability to control resistance based
on on-screen data, you can still record your session data via BLE or ANT+.
C O N N E C T I N G T O A P P S
1. Plug your Atom into a wall outlet using the power adaptor provided. Ensure
the switches on both the wall outlet and the rear of the Atom are turned on.
2. Enable Bluetooth or ANT+ on your device.
3. Open your preferred training app and navigate to the point of connecting your
indoor trainer.
4. Select the displayed Atom ID. For example: ‘Atom02345’ or ‘02345’.
TIP: The digits correspond to the last 5 digits of the serial number of your Atom.
C O N N E C T I N G C Y C L I N G C O M P U T E R S
To connect your Atom with your cycle computer:
1. Navigate to the ‘pair sensors’ or similar screen.
2. Depending how your device displays the sensor ID, select the displayed Atom
sensor ID. For example: ‘Atom02345’ or ‘02345’.
TIP: The digits correspond to the last 5 digits of the serial number of your Atom.
3. If you are prompted to confirm your selection, confirm to finalise the
pairing process.