Wattbike ATOM, User Manual, Page: 5 / 20

05
0 3
G E T R E A D Y T O R I D E
Unpacking the Wattbike Atom requires scissors and/or a knife. Take care with
these items to avoid personal injury or product damage.
You will need the supplied spanner and the 5mm and 4mm Allen keys to
complete the build.
B U I L D
1. Remove the Atom and its accessories from the packaging.
2a. Screw the right pedal onto the right crank. Tighten clockwise securely using
the provided spanner.
TIP: The cranks have a standard screw fitment, allowing you to customise the
Atom with pedals of your choice.
2b. Screw the left pedal onto the left crank. Tighten anti-clockwise securely using
the spanner.
3a. Take the Tri-bar assembly and insert the two ends into the Tri-bar clamps
with device holder out in front of the bike.
3b. Level up the two Tri-bar ends in their clamps, tighten the securing screw
using the 4mm Allen key.
3c. Insert the two plastic bungs into the open ends of the Tri-bar ends.
4. Take the metal Tri-pad cups, rest them on the blocks and screw into place to
secure. Remove the velcro from the back of the pads (without removing the
protective layer). Once off, remove the protective layer and affix to the metal
Tri-pad cup. You can now fasten the Tri-pads in position on to the velcro.
5. Ensure all bolts are tight and the handlebar fixings are secure.
6. Plug your Atom into a wall outlet using the power adaptor provided.
Make sure the switch on both the wall outlet and the rear of the Atom
are turned on.