WATT MIGNON6, Manual

Page: 78 / 97

page 26 of 42
PARAMETER
UNIT OF
M.
MOD. 8
(S)
MOD. 10
(M1)
MOD. 10
(M2)
MOD. 12
(L)
WATT9N
Heat input kW 7,2 8,24 8,87 10,1 8,8
Nominal heat output
kW 6,4 7,48 8,02 9,05 7,4
Reduced heat output
kW 2,9 2,64 2,64 2,64 2,64
CO concentration at nominal
reference (13% O )
2
mg/m
3
138 157,7 165,9 177,1 165,9
CO concentration at reduced
reference (13% O )
2
mg/m
3
263 488,7 488,7 488,7 488,7
Nominal efficiency
% 89,5 91 90,5 89,53 90,5
Reduced efficiency % 94,4 92,7 92,7 92,7 92,7
Pellet consumption (min-max) Kg/h 1,45 - 0,62 1,68 1,81 2,06 - 0,58 1,81
Flue gas flow rate (min-max) g/s 2,7 - 5,7 6,3 - 3,4 6,7 - 3,4 7,4 - 3,4 6,7 - 3,4
Draft advised (min-max) Pa 10 10 - 12 10 - 12 10 - 12 10 - 12
Flue gas temperature (min-max) °C 86 - 151 77 - 127 77 - 135 77 - 149 77 - 135
Tank capacity Kg 13 13 13 13 13
Recommended fuel
(ø x H) mm
pellet 6x30 pellet 6x30 pellet 6x30 pellet 6x30 pellet 6x30
Diameter smoke outlet tube mm 80 80 80 80 80
Diameter air intake mm 50 50 50 50 50
Nominal voltage V 230 230 230 230 230
Nominal frequency Hz 50 50 50 50 50
Power consumption max W 300 300 300 300 300
Power consumption at nominal
power
W 63 68 68 73 68
Power consumption at reduced
power
W 38 38 38 38 38
Stove weight Kg 82 82 82 87 82
N° Test Report K7592012T1 - K7592019E7 - K19382016Z1 - K19502016Z1
It is recommended that the control of emissions after installation.
Pellet
The pellets are cylinders of compressed wood, produced from sawdust and wood processing (chips and
sawdust), generally produced by sawmills and carpenters. The binding capacity of the lignin
contained in wood, allows to obtain a compact product without adding additives and
foreign chemicals to the wood, is therefore obtained a natural fuel with high yield. The
use of expired pellets or any other unsuitable material can damage parts of the
thermostove and impair proper operation: this can lead to the termination
of the guarantee, and its producer responsibility.
For our products use pellets diameter 6 mm, length 30 mm and
a maximum of 8% and A1 certified according to the UNI EN ISO
17225-2 standard. Keep the pellets away from heat sources and
not in humid environments or with explosive atmosphere.
EN