background image

2

Need help or have any questions?  Call us at 1-714-963-0329 or send us an email to [email protected]

TABLE OF CONTENTS

This R/C airplane is not a toy! If misused or abused, it can cause serious bodily injury and/or damage to property.  Fly only
in open areas and preferably at a dedicated R/C flying site.  We suggest having a qualified instructor carefully inspect your
airplane before its first flight.  Please carefully read and follow all instructions included with this airplane, your radio control
system and any other components purchased separately.

SAFETY WARNING

OUR GUARANTEE

Wattage guarantees this kit to be free from defects in both material and workmanship at the date of purchase.  This does not cover any component
parts damaged by use, misuse or modification.  

In no case shall Wattage's liability exceed the original cost of the purchased kit.

In that Wattage has no control over the final assembly or material used for final assembly, no liability shall be assumed for any damage resulting from
the use by the user of the final user-assembled product.  By the act of using the final user-assembled product, the user accepts all resulting liability.

FOR YOUR INFORMATION

To make your modeling experience totally enjoyable, we recommend that you get experienced, knowledgeable help with assembly and
during your first flights.  Your local hobby shop has information about flying clubs in your area whose membership includes qualified
instructors.  If there is no hobby shop in your area, we recommend that you contact the AMA at the address below.  They will be able to
help you locate a flying field near you.

Academy of Model Aeronautics

5151 East Memorial Drive

Muncie IN 47302-9252

(800) 435-9262

www.modelaircraft.org

Safety Warning ...................................................................................... 2

Introduction ............................................................................................ 3

Section 1: Our Recommendations .......................................... 4

Section 2: Tools and Supplies Required ................................ 5

Section 3: Kit Contents ........................................................... 6

Section 4: Replacement Parts ................................................ 6

Section 5: A Note About Covering .......................................... 7

Section 6: Checking the Wing for Warps ................................ 7

Section 7: Airframe Assembly ................................................. 8

Section 8: Control Systems Installation ................................ 10

Section 9: Final Assembly ..................................................... 15

Section 10: Balancing the Odyssey EP ARF ........................ 17

Section 11: Control Throws & Flight Setup .......................... 18

Section 12: Preflight Check & Safety ................................... 19

Section 13: Flying the Odyssey EP ARF .............................. 20

Section 14: Glossary of Terms .............................................. 20

Product Evaluation Sheet ................................................................... 23

Summary of Contents for odyssey ep arf

























Reviews: